V9.7 01/05/20 UD0011 Page 109 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
12.16 POWER SETTINGS
The Power Administration section allows you to change the touch screen brightness under certain conditions, such
as when the Battery is Low or Critical, or when the system is running on Mains etc.
To edit these options, an admin user will need to log into the system. For further details on how to access the system,
please refer to the ‘Accessing the System’ section.
1. Click the Admin button.
2. Click the Power button.
Power Options
To change any of the power options simply click either of the arrow keys to the right of the description. The
power options are as follows...
Set backlight when running on mains
Set backlight when running on battery
Set backlight when the battery is low
Set backlight when the battery is critical
Set backlight when the screensaver activates
NOTE: Only applies if backlight is not already darker
Activates screensaver after x seconds of no activity
The Defaults button sets all your custom power options back to the Traka default settings.
The Info button displays all the power supply information, such as, the battery backup capacity and Voltage, the
mains power level etc. Click the Options button to return to the power options.
When you have completed your changes click Exit and you will be taken back to the admin menu. From there click Exit
to be taken back to the login screen.
To Next Page
Loading...
