V9.7 01/05/20 UD0011 Page 43 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
9. ITEM SETUP
9.1 INITIAL SETUP
NOTE: This procedure must be carried out by an Admin user.
During the initial iFob setup, the Traka Touch system will scan for all the existing iFobs in the system and assign them
to a detail field in the Item record.
1. As an Admin user, log in to the Traka Touch system and select the Admin button.
2. From the admin menu, select the Items button.
The Item administration menu will show all the available slots and items in the system. As the items are only known to
be in the system, they will have no item record.
3. Select the Setup button.
To Next Page
Loading...
