Assa Abloy TRAKA UD0011 - Enforce TLS 1.2 Setting

V9.7 01/05/20 UD0011 Page 81 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
12.7.1 ENFORCE TLS 1.2
Within Traka Touch Network Administration, there is an Administration Option called Enforce TLS 1.2
This option is turned off by default. In this state, Traka Touch will communicate with the Comms Engine using TLS 1.0.
With the option enabled, Traka Touch will ONLY communicate with the Comms Engine using TLS 1.2
IMPORTANT: A diagnostics option is available within Network Administration. With the Enforce TLS 1.2
enabled you can configure TLS 1.2 logging levels. This should only be used under the guidance of Traka
Support.
12.8 CHANGING CERTIFICATES IN THE TRAKA TOUCH ‘ROOT STORE’
In v2.3.0 or later of the Application software a new screen for certification management is added.
1. Select the Network menu from the Admin menu.
2. Select the Certs button.