V9.7 01/05/20 UD0011 Page 133 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
17.2 FAULT LOGGING
Fault Logging is a cost option feature available for both Key Cabinets and RFID Locker Systems. It allows a user to record
faults against items, such as vehicles or laptops. Subsequently, depending on the criticality of the fault, access can be
restricted to those items to prevent further damage, wasted time or injury, for example a flat tyre on a vehicle.
Fault Logging can be used in 2 ways:
1. Generate and clear faults at both TrakaWEB and the Traka Touch system.
2. Generate and clear faults using TrakaWEB only.
The way in which Fault Logging is used is determined in the configuration process and will already have been setup at
Traka. Should you require a change to this configuration please contact Traka or your Distributor.
NOTE: For a comprehensive guide to the functionality of the Fault Logging Feature Option, please refer to
UD0018 – TrakaWEB User Guide
17.3 REASON LOGGING
Reason logging is a cost option that allows a user to log a 'reason' against the removal or return of an item. Reasons
are created within TrakaWEB, and are then selectable from a list at the Traka Touch system when either removing or
returning an item.
NOTE: For a comprehensive guide to the functionality of the Reason Logging Feature Option, please refer to
UD0018 – TrakaWEB User Guide
17.4 NOTES LOGGING
Notes Logging is a cost option that allows a user to enter a note into an on-screen dialogue box at the Traka Touch
system when removing or returning an item. A maximum of 255 characters can be entered at any one time.
With Notes Logging enabled, when a user removes and/or returns an item, a window with a keyboard will pop up allowing
them to enter a note.
NOTE: For a comprehensive guide to the functionality of the Notes Logging Feature Option, please refer to
UD0018 – TrakaWEB User Guide
17.5 CUSTOM MESSAGES
Custom Messages is a cost option that allows the Traka Touch to display a definable message to the user when they
remove or return an item. This message can be defined for each individual position in the system. This ensures that the
user is aware of any special condition that must be met in relation to the item.
Once setup, the message will be displayed when a user removes and/or returns an item depending on how the Custom
Messages have been configured.
NOTE: For a comprehensive guide to the functionality of the Custom Messages Feature Option, please refer
to UD0018 – TrakaWEB User Guide
To Next Page
Loading...
