V9.7 01/05/20 UD0011 Page 110 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
12.17 CONFIGURATION
The Config administration section allows you load a new configuration file into the system. This is required if a customer
has requested additional software options or a change of reader for example. Traka will then compile a new configuration
file and send it to you to import via a USB memory stick.
NOTE: For further information on USB memory stick specification, refer to section 5.4.
1. Once you have the new configuration file, copy it to a usable USB memory stick.
2. Access the system and click the Admin button.
3. Click the Config button.
4. Click the Import button in the bottom right hand corner of the Configuration screen.
5. The system will then open the door and prompt you to insert a USB memory stick.
To Next Page
Loading...
