V9.7 01/05/20 UD0011 Page 153 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
18.4 CAN OVERRIDE KEY-SWITCH
This section covers the use of the CAN Override Key-Switch. If fitted to your system it may be used to access a key if
for example, the Touch screen is damaged and inoperable, or a large number of keys are required quickly. The door
maybe overridden to activate the key-switch to access all the keys as required.
NOTE: The key for the override switch will be different than the ones used for accessing the cabinet or the
pod and should be stored in a secure location with strict access restrictions.
18.4.1 ACCESSING THE SYSTEM
1. If the Touch system is operational, access the system using keypad, fingerprint or Swipe card.
NOTE: If the door requires manual access, a master key will be required to open it.
2. For an S-Series cabinet, insert the Master key into the cam-lock on the top of the cabinet and turn 90°
clockwise. The door will then open.
3. For an L-Series cabinet, insert the Master key into the cam-lock on the front of the cabinet and turn 90°
clockwise. The door will then open.
To Next Page
Loading...
