V9.7 01/05/20 UD0011 Page 154 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
18.4.2 USING THE OVERRIDE KEY-SWITCH
1. Insert the key into the cam-lock and turn the key through 90° then leave the key in that position.
2. Press and hold the iFob release button on the desired iFob.
3. Remove the iFob from the system then release the button.
4. Repeat this process to remove all the required iFobs.
5. Once all the required iFobs have been removed, turn the key to the off position.
NOTE: The key cannot be removed until it has been rotated back through 90°.