Placing a call on Hold
Use the Hold feature when you are talking to one contact and want to perform another action, such
as answer a new incoming call, transfer a call, or initiate a new call. You can have a number of calls
on hold at the same time.
Placing a call on hold
To place a call on hold:
1. Press the Hold fixed key.
The LCD on hold icon flashes beside the line on hold.
The following figure shows the IP Deskphone display area when a call is placed on hold.
Figure 29: Call On Hold
Retrieving a call on hold
To retrieve a call on hold:
1. To retrieve a call on hold, do one of the following:
• Press the Line feature key beside the flashing LCD indicator.
• Press the Hold fixed key.
Releasing a call on hold
You must retrieve a call on hold before you can release it.
To release a call on hold:
1. Retrieve the call on hold:
• Press the Line feature key beside the flashing LCD indicator.
OR
• Press the Hold fixed key.
Table continues…
Placing a call on Hold
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 145
Comments on this document? infodev@avaya.com
To Next Page
Loading...
