EasyManua.ls Logo

Avaya 1140E - Connecting the LAN Ethernet Cable

Avaya 1140E
298 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can select a headset from the following list of supported headsets.
Type 1: Monaural and Binaural Headset
- Monaural Headset: Plantronics Model number: H251N (Part number: 64338-01) with cable
Model Number: A10 (Part Number: 66268-02)
- Binaural Headset: Plantronics Model number: H261N (Part number: 64339-01) with cable
Model Number: A10 (Part Number: 66268-02)
Type 2: Monaural and Binaural Headset
- Monaural Headset: Plantronics Model number: HW251N (Part number: 75100-06) with cable
Model Number: A10 (Part Number: 66268-02)
- Binaural Headset: Plantronics Model number: HW261N (Part number: 75101-06) with cable
Model Number: A10 (Part Number: 66268-02)
Type 3: Binaural Headset
- Binaural Headset: GN Netcom Model number: GN 4800 (Part number: 48492-09)
After you select a headset, the corresponding tuning parameters are applied automatically.
Use the following procedure to select a headset.
1. Press Prefs.
2. Select Audio.
3. Select Headset Type.
Connecting the LAN ethernet cable
Note:
Your IP Deskphone supports both AC power and PoE options, including IEEE 802.3 standard
power. To use local AC power, you can order the optional AC adapter separately. To use PoE,
where power is delivered over the CAT5 cable, the LAN must support PoE, and you do not need
an AC adapter.
To enable full functionality of your IP Deskphone, connect your IP Deskphone to your LAN using a
CAT5e Ethernet cable. If your network is equipped with PoE, you can power your IP Deskphone
through the LAN port.
To connect your IP Deskphone to your LAN use the following procedure:
1. Connect one end of the supplied Ethernet cable to the back of your IP Deskphone by using
the RJ-45 connector marked with the network symbol.
The network symbol is as follows:
2. Thread the network cable through the channel marked with the network symbol.
3. Connect the other end of the cable to your LAN Ethernet connection.
Installing the 1140E IP Deskphone
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 50
Comments on this document? infodev@avaya.com

Table of Contents

Other manuals for Avaya 1140E

Related product manuals