Avaya 1140E - Automatic Login; Configuring the Domain

• Logging on to your Avaya 1140E IP Deskphone on page 36
• Configuring the duration of the login on page 38
• Selecting a location on page 40
•
User Profile on page 40
• Overwriting your personal Address Book on page 41
Note:
The system automatically logs you back on after a power outage or software upgrade. The
system administrator configures this feature on a network-wide basis.
Automatic login
Before you first receive your Avaya 1140E IP Deskphone, your system administrator can configure
your IP Deskphone with your user logon and password. If this is the case, after you plug in the IP
Deskphone you can use it without further configuration.
Note:
If the IP Deskphone is configured with automatic logon, you cannot use the log off function, and
you need a password to access some features and functions. Contact your system
administrator or service provider for further information.
Configuring the domain
Before the log on process, if you need to change the domain or confirm that the domain you log on
to is correct, press the Domain context-sensitive soft key from the logon prompt. The current
domain appears on the IP Deskphone display screen. You can edit the domain that is listed or press
the Domain context-sensitive soft key to access a list of available domains to which you can choose
to connect.
Note:
• You must enter the admin password to edit domains.
• Check with your system administrator before editing or changing domains.
To change the domain:
Domain 1. Press the Domain context-sensitive soft key to change the
current domain.
Note:
You must enter an admin password before you can edit the
domain in which the IP Deskphone connects.
Table continues…
Accessing the Avaya 1140E IP Deskphone
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 34
Comments on this document? infodev@avaya.com