4. Choose one of the following:
• Press the toVM soft key to connect the calling party to Voice
Mail.
• To return to the previous screen, press the Back soft key.
Note:
• The Transfer to Voice Mail feature is not available for all call servers. Contact your system
administrator or service provider to determine if this feature is available to you.
• The Transfer to Voice Mail feature during a conference call is dependent on the call server
and is not allowed. If the Secure Digits feature is enabled, and you connect to Voice Mail
during an active call, the screen displays only the last pressed key , and the remaining
digits appear as ‘*’.
You can press Hide or Unhide to hide or display the pressed keys.
Note:
The Transfer to Voice Mail feature is available only when configured by your system
administrator.
Using the Park Call feature
You can use the Park Call feature to temporarily park a call to the call server or to a specific user.
You or another user can retrieve the parked call from another phone. Using Park Call does not tie up
a line, since it is held on the call server.
Note:
• The Park Call feature is not available for all call servers. Contact your system administrator
or service provider to determine if this feature is available to you.
• The behavior of the Park Call feature varies depending on the call server. This can affect
the information appearing on the IP Deskphone.
• When you park a call to the server, the server returns a retrieval code. You must enter the
code to retrieve the call from park.
While on an active call
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 158
Comments on this document? infodev@avaya.com
To Next Page
Loading...
