1. Press the Handsfree key.
The LED indicator lights with a solid red light.
2. Replace the handset.
To use a headset:
1. Connect the headset to the headset jack.
2. Press the Headset key.
The LED indicator lights.
3. Press the Goodbye key or press the button on the wireless
headset, if equipped, to release a call.
To switch from handsfree to headset:
Press the Headset key.
The LED indicator lights.
Using Call Subjects
You have the option of sending a Call Subject when you initiate a call to a contact. Use this feature
to indicate to the contact the reason for the call. The IP Deskphone contact displays a message,
such as Weekly report call or Daily status when they receive the call. You can select a subject from
a list you create. For more information, see
Managing Call Subjects on page 91, or you can create
a new subject.
Note:
The Call Subject feature is not available for all call servers. Contact your system administrator
or service provider to determine if this feature is available to you.
Whenever you initiate a call by using off-hook dialing, the Subject context-sensitive soft key appears
as an option to use. You can select a Call Subject from a list or create a new Call Subject to send.
To enter a call subject from a list:
1. Press the Subject context-sensitive soft key to send a Call
Subject with the call you are making.
A list of Call Subjects appears on the LCD screen.
Table continues…
Using Call Subjects
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 89
Comments on this document? infodev@avaya.com
To Next Page
Loading...
