Change
Back
1. Choose one of the following:
• Press the Change context-sensitive soft key to change the
current language.
• Press the Back context-sensitive soft key to keep existing
language and return to the User Login screen.
Navigation key cluster 2 .Press the Up/Down navigation key to highlight the new
language you want to use.
Select
Back
3. Choose one of the following:
• Press the Select context-sensitive soft key to change the
language to the highlighted language from the list. The IP
Deskphone returns to the User Login screen and uses the
selected language.
• Press the Back context-sensitive soft key to keep the existing
language and return to the User Login screen.
Logging on to your Avaya 1140E IP Deskphone
You need to log on to your Avaya 1140E IP Deskphone when you first install and start your IP
Deskphone and anytime you log off or reboot.
Note:
• When you log on to the IP Deskphone for the first time, the system prompts you for a
location. For more information, see Selecting a location on page 40.
• The IP Deskphone retains the previous user logon ID, which appears after the ID prompt
whenever the IP Deskphone reboots.
If Authentication is enabled by your system administration, you can enter your authentication ID
independent of your user ID. The authentication ID is used when the server challenges the IP
Deskphone
To logon to the IP Deskphone:
1. Press the
abc/123 soft key to toggle between alphabetic or
numeric input.
2. Use the dialpad to enter your user ID login at the prompt.
Table continues…
Accessing the Avaya 1140E IP Deskphone
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 36
Comments on this document? infodev@avaya.com
To Next Page
Loading...
