Avaya 1140E - Feature Key Autoprogramming

3. Choose one of the following:
• Press the Back context-sensitive soft key to return
to the previous screen.
• Press the Remove context-sensitive soft.
The IP Deskphone displays Confirm Remove
key?
4. Choose one of the following:
• Press the Yes context-sensitive soft key to confirm
the removal of the feature key.
• Press the No context-sensitive soft key to return to
the previous screen without removing the feature
key.
Feature key autoprogramming
The feature key autoprogramming provides the user with the ability to cause the IP Deskphone to
detect all unused programmable keys, and to automatically fill them as Speed Dial keys, Send IM
keys, or Call Forwarding keys using the user Friends list or the user Address Book. The feature key
autoprogramming also provides the user with the ability to remove all programmed feature keys
from the IP Deskphone.
Autoprogramming does not overwrite feature keys already programmed and when the IP
Deskphone detects if a feature key is already configured with Speed Dial, Send IM, or Call Forward
for contact, it does not create a new instance.
Note:
The autoprogramming feature options are dependent on your service provider and IP
Deskphone configuration. If you attempt to use the autoprogram feature (Bulk context-sensitive
soft key) for a feature that is not available to you, the IP Deskphone displays the message:
This feature is disabled. Contact your provider.
Autoprogram feature keys:
1. Press the Prefs context-sensitive soft key, select Feature
Options, and select Feature Keys from the menu.
The Program Key screen opens as shown in Feature key
screen on page 168.
2. Choose one of the following:
• Press the Bulk context-sensitive soft key.
• Press the Back context-sensitive soft key to return to the
previous step.
Table continues…
Additional features
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 180
Comments on this document? infodev@avaya.com