Avaya 1140E - Ad Hoc Conferencing When Connecting to the Call Server

Note:
Your system administrator or service provider must enable 3-way calling and conference calls
for your IP Deskphone. Contact your service provider or system administrator to determine if
this feature is available.
To configure a conference call while on an active call with more than one other caller:
1. Press the Up/Down navigation key to highlight one of the calls,
2. Press the Join context-sensitive soft key and select Conference
from the menu.
The calls are joined together as a conference call on the call server.
When you receive a new call while on a conference call, you can answer, ignore, decline, or forward
the call as you would any call. You can also initiate a new call while on a conference call in the
normal way and return to the conference call after you complete the call. The conference call
continues while you are on the other call.
Note:
If you press the Goodbye key or select Release from the Action menu while on the conference
call you leave the conference call. The conference call continues with the other callers.
To join a call to an existing conference call:
1. Press the Up/Down navigation key to highlight the call you want
to join to the conference.
2. Press the Join context-sensitive soft key to join the highlighted
call to the conference.
Ad hoc conferencing when connecting to the Call Server
This feature allows you to make ad hoc conference calls when you connect to the Call Server.
While on an active call
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 152
Comments on this document? infodev@avaya.com