Avaya 1140E - Making a Call Using On-Hook Dialing

2. You can make a call using one of the following methods:
• Enter the phone number or SIP address by using the dialpad.
Note:
The abc/123 context-sensitive soft key toggles between
alphabetic and numeric input.
• Press the Redial context-sensitive soft key to dial the last
dialed number.
Note:
The Redial context-sensitive soft key only appears if a
number or address was previously entered.
• Press the Msgs context-sensitive soft key and then select
Voice Mail from the Messages menu to access your voice
mail.
• Press the Speed dial feature key that you programed to call
with a commonly used or important phone number or SIP
address.
Note:
You can program a feature key to use as a shortcut to
dial a number or a SIP address. For more information,
see Feature keys on page 167.
3. Press the Send context-sensitive soft key to immediately
initiate the call.
Note:
The IP Deskphone automatically initiates a call shortly
after you enter the SIP address or phone number.
Making a call using on-hook dialing
You can make a call by using on-hook dialing. Enter the SIP address or the phone number before
going off-hook.
Note:
When you use this method, you cannot toggle between alphabetic or numeric input.
Making a call using on-hook dialing
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 87
Comments on this document? infodev@avaya.com