Configuring the duration of the login
After you enter your logon ID and password, the Duration screen appears. You can enter the
maximum length of time of the session. If you choose to use the default duration Permanent, you
remain logged on to the phone until you log off.
To configure the login duration:
1. Choose one of the following:
• Press the Next context-sensitive soft key to configure the logon
duration to Permanent. A login confirmation screen appears.
• Press the Timed context-sensitive soft key to open a screen to
configure a maximum time to remain logged in.
Note:
If you press the Timed context-sensitive soft key, you must
then configure the duration of the login.
2. Press the Period context-sensitive soft key to toggle the logon
duration entries between hours or days.
3. Do one of the following:
• Use the dialpad to enter the number of hours or days you want to
remain logged on and press the Next context-sensitive soft key.
• Press the Back context-sensitive soft key to return to the
permanent logon screen.
• Press the Cancel context-sensitive soft key to return to the first
logon screen.
Table continues…
Accessing the Avaya 1140E IP Deskphone
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 38
Comments on this document? infodev@avaya.com
To Next Page
Loading...
