Note:
Use the left navigation key to backspace and remove a
previous user ID.
3. Press the Login soft key.
If Authentication is enabled by your system administration, you are
presented with the Authentication ID screen. The authentication ID
is autofilled with your user ID.
If Authentication is not enabled, a new screen appears and prompts
you for your password.
4. Enter your password by using the dialpad.
Note:
• When you enter your password, the last character entered
appears. However, all previous characters are hidden.
• When you enter your password, if you use the navigation key
to backspace then you erase all the characters and must
completely reenter your password again.
5. Press the Next soft key.
Note:
You can cancel the login process by pressing one of the
following keys:
• Cancel soft key
• Goodbye fixed key
• Quit fixed key
Table continues…
Logging on
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 37
Comments on this document? infodev@avaya.com
To Next Page
Loading...
