Configuring a Presence state
You can configure a presence state to enable other users to see information about your availability.
You can select from a list of pre-made messages or create a new message to display for your
presence state.
To configure a Presence state:
1. Press the Presnce context-sensitive soft key (press the
More… context-sensitive soft until Presnce appears).
2. Choose one of the following:
• Press the Change context-sensitive soft key to change your
current Presence state.
• Press the Back context-sensitive soft key to return to the
Services menu.
3. Press the Up/Down navigation key to highlight either:
• Connected
• Unavailable
4. Choose one of the following:
• Press the Select context-sensitive soft key to continue to the
next screen.
• Press the Back context-sensitive soft key to return to the
previous step.
You can choose a more detailed message for other users to see,
or you can select None if you do not want to provide additional
information.
Table continues…
Additional features
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 190
Comments on this document? infodev@avaya.com
To Next Page
Loading...
