Avaya 1140E - Bulk-Create Feature Keys Based on an Existing Directory Address Book Group

Bulk-create feature keys based on an existing directory Address
Book group
To bulk-create feature keys based on an existing directory Address book group:
1. From the idle screen, press the Prefs context-sensitive soft
key (press the More… context-sensitive soft key until you see
Prefs).
2. Press the Up/Down navigation key to highlight Feature
Options, then choose Feature keys.
The main feature key programming screen appears.
3. Press the Bulk context-sensitive soft key.
The Program Key Bulk commands screen appears
4. Press the Up/Down navigation key to highlight Feature key
creation.
5. Press the Select context-sensitive soft key. The Create keys
screen appears.
6. Press the Up/Down navigation key to highlight the type of
programmed keys you want to create by bulk command.
You can choose one of the following options:
• Speed Dial
• Send IM
• Call Forward
Table continues…
Service Package Group Support
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 239
Comments on this document? infodev@avaya.com