1. Double-press the Headset key to open the Bluetooth Setup dialog
box.
2. Press the Right navigation key to select the Paired item.
3. If the name of your headset appears in the Paired box, proceed to
step 11.
4. If more than one device is paired, and your headset is not already
displayed in the Paired box, press the Right navigation key one or
more times to highlight the Paired box.
5. Press the Enter key to open edit mode.
6. Press the Up/Down navigation key to open the list.
7. Press the Up/Down navigation key to scroll through the list and
highlight your headset.
8. Press the Enter key to select the headset and close the box.
9. Press the Enter key to exit edit mode.
10. Press the Right navigation key one or more times to highlight the
UnPair button (next to the UnPair Device item).
11. Press the Enter key.
Your Bluetooth wireless technology headset is unpaired and removed
from the Paired item list.
Your Bluetooth wireless technology headset is no longer paired with your IP Deskphone, and you
can use the wired headset. To use the wireless headset again, you must perform the pairing and
activation procedure.
Configuring a Bluetooth wireless technology headset
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 85
Comments on this document? infodev@avaya.com
To Next Page
Loading...
