Procedure
Figure 35: Correct filtering
Confirming port belongs to at least one VLAN
About this task
View information to ensure that the port belongs to a VLAN.
Procedure
1. Use the show vlan interface info <port> command to view the details.
2. Note the VLANs listed with the port.
Disabling the VLAN filtering of unregistered frames
About this task
Change the unregistered frames filtering of the VLAN.
Troubleshooting ADAC
106 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com
To Next Page
Loading...
