Avaya 4000 Series - Navigation; Cannot set the forward path; Cannot set the forward path task flow

Navigation
•
Cannot set the forward path on page 228
• Bootp/DHCP requests from clients do not reach Bootp/DHCP server on page 229
• Bootp/DHCP replies from server do not reach Bootp/DHCP clients on page 237
Cannot set the forward path
This task flow assists you to resolve the following error message if it appears:
•
% Cannot modify settings
% Error agent/server does not exist
Cannot set the forward path task flow
About this task
The following task flow helps you to verify that the relay agent IP address is the same as the
one configured on the VLAN where relay is performed.
Procedure
Figure 83: Task flow: Cannot set the forward path
Troubleshooting DHCP/BootP relay
228 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com