Avaya 4000 Series - Enabling EAP on PC network card; Apply the method; Task flow: Apply the method

Enabling EAP on PC network card
About this task
The PC must have the correct hardware and configuration to support EAP.
Procedure
1. See vendor documentation for the PC and network card.
2. Ensure the network card is enabled.
3. Ensure the card is configured to support EAP.
Apply the method
Ensure you apply the correct EAP method.
Task flow: Apply the method
About this task
The following task flow assists you to apply the correct EAP method.
Troubleshooting authentication
124 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com