Avaya 4000 Series - Checking the IPV6 default gateway status

Procedure
Figure 71: Task flow: Cannot connect through IPv6 default gateway
Checking the IPV6 default gateway status
About this task
Use the procedure in this section to check the IPv6 default gateway status.
Procedure
1. Use the show ipv6 default-gateway command to display the status of the
gateway.
2. Confirm that the status is ReachableInRtm.
Troubleshooting IPv6
180 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com