Field Description
disabled, the unknown multicast traffic is
forwarded on all ports. Default is disabled.
Job aid
The following table describes the output of the show vlan igmp unknown-mcast-no-
flood command.
Field Description
Allowed Multicast Addresses Indicates the MAC addresses for which the
multicast traffic is not pruned when the option
igmp unknown-mcast-no-flood is enabled.
Disabling multicast packets
About this task
Use this procedure to disable the multicast flooding.
Procedure
1. Use the unknown-mcast-no-flood command to disable multicast flooding.
2. Observe the command output.
Multicast packets not flooding network
This section describes how you can enable multicast flooding on a network.
Multicast packets not flooding network task flow
About this task
The following task flow steps you through the procedures to enable multicast flooding on the
network.
Multicast packets not flooding network
Troubleshooting Avaya ERS 4000 Series April 2014 201
To Next Page
Loading...
