Avaya 4000 Series - EAP-non-EAP unexpected port shutdown; Work flow: EAP-non-EAP unexpected port shutdown

• Allow Auto Non-EAP MHSA: Enabled
Enabling RADIUS to auth non-EAP MACs
About this task
Make the required changes on the RADIUS server to authenticate non-EAP clients.
Apply changes to the RADIUS server using vendor documentation.
EAP–non-EAP unexpected port shutdown
Identify the reason for the port shutdown and make configuration changes to avoid future
problems.
Work flow: EAP–non-EAP unexpected port shutdown
About this task
The following work flow assists you to determine the solution for EAP–non-EAP ports
experiencing a shutdown.
Procedure
Figure 64: EAP-NEAP unexpected port shutdown
Configure switch
Configure ports to allow more unauthorized clients.
Troubleshooting authentication
156 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com