Avaya 4000 Series - Viewing IP manager configuration; Enabling SNMP

Procedure
1. Use the spanning-tree rstp traps command to enable RSTP traps.
2. Observe the command output.
Viewing IP manager configuration
About this task
Use the procedure in this section to display the IP manager configuration.
Procedure
1. Use the show ipmgr command to view the IP manager configuration.
2. Observe the command output.
Job aid
The following is an example of output from the command.
TELNET Access:
Enabled
SNMP Access: Disabled
WEB Access: Enabled
SSH Access: Enabled
Enabling SNMP
About this task
Use the procedure in this section to enable SNMP.
Procedure
1. Use the snmp-server enable command to enable SNMP.
Troubleshooting RSTP SNMP traps
212 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com