Avaya 4000 Series - Task flow: RADIUS server configuration error

Task flow: RADIUS server configuration error
About this task
The following task flow assists you to configure the RADIUS server with the correct MAC and
password.
Procedure
Figure 60: RADIUS server configuration error
Configuring MAC and password on RADIUS server
About this task
The RADIUS server requires that the MAC and password for the Avaya Ethernet Routing
Switch 4000 Series device be correct. If it is incorrect, the Avaya Ethernet Routing Switch 4000
Series device may not authenticate.
See the vendor documentation for the RADIUS server for details.
Non-EAP MHSA MAC is not authenticating
Ensure that the switch is configured correctly.
Non-EAP RADIUS MAC not authenticating
Troubleshooting Avaya ERS 4000 Series April 2014 151