Avaya 4000 Series - Understanding limitations of some SFPs; Viewing GBIC details

Understanding limitations of some SFPs
About this task
Use this procedure to understand some limitations regarding unsupported XFPs or SFPs.
Procedure
1. Use the show stack-info command to display device information.
2. Use the show interfaces gbic-info command to display device
information.
3. Confirm that SFP AA1419075-E6 1-port T1 SFP and AA1419074-E6 1-port
100Base-FX SFP is only connected to a 4526T, 4526T-PWR, 4526T-PWR+,
4526FX, 4524GT, 4550T, 4550T-PWR, 4550T-PWR+, 4524GT-PWR, 4826GTS,
4826GTS-PWR+, 4850GTS or 4850GTS-PWR+.
Note:
You cannot use a T1 SFP or a 100Base-FX SFP on ERS 48xx SFP+ ports.
Viewing GBIC details
About this task
Use this procedure to display the GBIC device details.
Procedure
1. Enter Global configuration mode.
2. Use the show interfaces gbic-info command to view device information.
3. Use the show interfaces gbic-info port <port number> command to
view device information for a specific port.
4. Use Web-based management to view device information by navigating to
Summary, Switch Information, Pluggable Port
5. Identify any unsupported devices.
XFP/SFP device not detected
Troubleshooting Avaya ERS 4000 Series April 2014 193