Viewing IP routing information
About this task
Use the procedure in this section to view IP routing information.
Procedure
1. Enter the show ip routing command to view IP routing information.
2. Identify that IP routing is enabled.
Enabling IP routing globally
About this task
Use the procedure in this section to enable IP routing globally.
Procedure
1. Enter the ip routing command to enable IP routing globally.
2. Enter the show ip routing command to confirm that global IP routing is now
enabled.
Viewing VLAN information
About this task
Use the procedure in this section to view VLAN information.
Procedure
1. Enter the show vlan ip command to view VLAN information.
2. Verify that the interfaces are enabled under the Offset Routing column.
Troubleshooting DHCP/BootP relay
232 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com
To Next Page
Loading...
