Figure 67: Task flow: Device not responding to ping to its IPv6 address part 2
Displaying IPv6 interface information
About this task
Use the procedure in this section to verify that the IPv6 global admin status is enabled.
Procedure
1. Use the show ipv6 global command to display the IPv6 global status.
2. Use the show ipv6 interface command to display the IPv6 interface status.
3. Ensure the admin-status is set to enabled.
Troubleshooting IPv6
170 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com
To Next Page
Loading...
