Navigation
•
Viewing VLAN IP information on page 229
Viewing VLAN IP information
About this task
Use this procedure to verify that the relay agent IP address from the forward path command
is the same as the one on the VLAN where relay is to be performed.
Procedure
1. Use the show vlan ip command to display the information.
2. Verify that the relay agent IP address from the forward path command is the same
as the one on the VLAN where relay is to be performed.
Bootp/DHCP requests from clients do not reach Bootp/
DHCP server
This section assists you to identify and correct connectivity issues between a client and the
DHCP or BootP server.
Bootp/DHCP requests from clients do not reach Bootp/DHCP server
task flow
About this task
The following task flows identify the procedures to identify and correct connectivity issues
between a client and the DHCP or BootP server.
Bootp/DHCP requests from clients do not reach Bootp/DHCP server
Troubleshooting Avaya ERS 4000 Series April 2014 229
To Next Page
Loading...
