Viewing RSTP configuration
About this task
Use the procedure in this section to view the existing RSTP configuration.
Procedure
1. Use the show spanning-tree rstp config command to display the RSTP
configuration.
2. Observe the command output.
Job aid
The following is an example of output from the command.
Priority (hex):
8000
Stp Version: Rstp Mode
Bridge Max Age Time: 20 seconds
Bridge Hello Time: 2 seconds
Bridge Forward Delay Time: 15 seconds
Tx Hold Count: 3
Path Cost Default Type: 32-bit
STP Traps: Disabled
Enabling RSTP traps
About this task
Use the procedure in this section to enable RSTP traps.
No RSTP SNMP traps are received
Troubleshooting Avaya ERS 4000 Series April 2014 211
To Next Page
Loading...
