Avaya 4000 Series - Auto configuration is not applied; Task flow: Auto configuration is not applied

Procedure
1. Follow local procedures and SOPs to reduce the number of devices connected.
2. Use the show adac in <port> command to display the ADAC information for
the port to ensure there are less than 16 devices connected.
Auto configuration is not applied
Correct some common issues that may interfere with auto configuration of devices.
Task flow: Auto configuration is not applied
About this task
The following task flow assists you to solve auto configuration issues.
Troubleshooting ADAC
110 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com