Avaya 4000 Series - Lowering EAP max MAC; Set EAPOL request packet; Task flow: Set EAPOL request packet

Lowering EAP max MAC
About this task
Lower the eap-mac-max value to match the users.
Procedure
1. Use the eapol multihost eap-mac-max command to set the mac-max
value.
2. Ensure that there are no errors after execution.
Set EAPOL request packet
Change the request packet generation to unicast.
Task flow: Set EAPOL request packet
About this task
The following task flow assists you to set the EAPOL request packet to unicast.
Troubleshooting authentication
130 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com