Avaya 4000 Series - Chapter 15: Troubleshooting SPBM; Displaying IS-IS configuration

Chapter 15: Troubleshooting SPBM
You can configure Shortest Path Bridging MAC (SPBM) only on the ERS 4800 series and the stack
operation mode must be pure.
Displaying IS-IS configuration
About this task
Display the IS-IS configuration.
Procedure
1. Display global IS-IS information:
show isis
2. Verify the ISIS interfaces administration and operations status are UP:
show isis interface
3. Display IS-IS adjacencies:
show isis adjacencies
4. Display IS-IS configuration components:
show isis system-id
show isis int-auth
show isis int-ckt-level
Example
ERS-1# show isis
===========================================
ISIS General Info
===========================================
AdminState : enabled
RouterType : Level 1
System ID : 00aa.bbcc.0001
Max LSP Gen Interval : 900
Min LSP Gen Interval : 30
Metric : wide
Overload : true
Csnp Interval : 10
PSNP Interval : 2
Rxmt LSP Interval : 5
spf-delay : 100
Troubleshooting Avaya ERS 4000 Series April 2014 215