Avaya 4000 Series - Deleting the IPv6 address; Configuring new IPv6 address; Configuring new IPv6 gateway address

Procedure
Use the show ipv6 address interface command to display the IPv6 address
interface information.
Deleting the IPv6 address
About this task
Use the procedure in this section to delete the IPv6 address.
Procedure
1. Use the no ipv6 interface address <IPv6 address> command to delete
the IPv6 address.
2. Observe the command output.
Configuring new IPv6 address
About this task
Use the procedure in this section to configure a new IPv6 address.
Procedure
1. Use the ipv6 address <IPv6 address> command to configure the IPv6
address.
2. Observe the command output.
Configuring new IPv6 gateway address
About this task
Use the procedure in this section to configure a new gateway IPv6 address.
Procedure
1. Use the ipv6 default-gateway <IPv6 address> command to configure the
gateway IPv6 address.
Cannot set IPv6 address
Troubleshooting Avaya ERS 4000 Series April 2014 189