Checking remote host integrity
About this task
Use the procedure in this section to check the IPv6 integrity of the remote host.
Procedure
1. Use vendor documentation to ensure the remote host is configured correctly for
IPv6.
2. Check cabling to ensure that no physical problem exists.
Duplicate address detected (global IPv6 address)
The global address was found to be a duplicate, indicating that another node in the link scope
already has the same address.
Duplicate address detected (global IPv6 address)
About this task
Use this task flow to restore the connectivity through IPv6.
Duplicate address detected (global IPv6 address)
Troubleshooting Avaya ERS 4000 Series April 2014 175
To Next Page
Loading...
