Avaya 4000 Series - Non-EAP MHSA MAC is not authenticating; Work flow: Non-EAP MHSA MAC is not authenticating

Work flow: Non-EAP MHSA MAC is not authenticating
About this task
The following work flow assists you to determine the solution for an MHSA MAC that is not
authenticating.
Procedure
Figure 61: Non-EAP MHSA MAC is not authenticating
Configure switch
Configure the switch to enable MHSA.
Task flow: Configure switch
About this task
The following task flows assist you to enable MHSA on the Avaya Ethernet Routing Switch
4000 Series device.
Troubleshooting authentication
152 Troubleshooting Avaya ERS 4000 Series April 2014
Comments? infodev@avaya.com