Avaya 9600 Series - Follow Me To; Follow Me Here; Forward on Busy

Parameter name Default
value
Description
CONFERENCE_FACTORY_URI Null Specifies the URI for Avaya Aura
Conferencing.
Valid values contain zero or one
URI, where a URI consists of a dial
string followed by @, and then the
domain name, which must match
the routing pattern configured in
System Manager for Adhoc
Conferencing.
Depending on the dial plan, the dial
string can need a prefix code, such
as a 9 to get an outside line. The
domain portion of the URI can be in
the form of an IP address or an
FQDN.
The value can contain 0 to 255
characters. The default value is null.
CONFERENCE_TYPE 1 Determines the selection of the
Conference Method.
Value operation:
• 0: Local conferencing is supported
based on sipping services.
• 1: Server based conferencing is
supported.
• 2: Click-to conference server
based conferencing is supported.
If the parameter is set to a value that
is outside the range then default
value is selected.
CONFIG_SERVER_SECURE_MODE 1 Specifies whether HTTP or HTTPS
is used to access the configuration
server.
Value operation:
• 0: HTTP
• 1: HTTPS
• 2: Use HTTPS if SIP transport
mode is TLS, otherwise use
HTTP.
Table continues…
List of configuration parameters
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 170
Comments on this document? infodev@avaya.com