Chapter 5: Phone administration
Introduction
During installation or after you have successfully installed a 9600 Series IP Deskphones, you
might be instructed to administer one of the manual procedures described in this chapter. These
local administrative procedures are also referred to as Craft Procedures.
Note:
You can modify the settings file to set parameters for deskphones that download their upgrade
script and application files from the same HTTP server. Only trained installers or technicians
must perform local (craft) procedures. Perform these procedures only if instructed to do so by
the system or LAN administrator.
Static administration of these options causes upgrades to work differently than if they are
administered dynamically. Values assigned to options in static administration are not changed
by upgrade scripts. These values remain stored in the deskphone until you use the local
administrative procedures CLEAR or RESET.
Use these option-setting procedures only with static addressing and, as always, only if
instructed by the system or LAN administrator. Do not use these option-setting procedures if
you are using DHCP.
About local administrative procedures
Craft procedures allow you to customize the IP phone installation for your specific operating
environment. This section provides a description of each local administrative option covered in this
guide.
Note:
By default, a user can view but not change most of the parameters associated with Craft
procedures.
Accessing the Administration menu
The Local or the CRAFT procedures can only be invoked if the value of the PROCSTAT parameter
in the 46xxsettings.txt file is set to 0. Setting the PROCSTAT parameter to 0 provides full
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 51
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
