with RJ9 connector, when the headset profile is set to Profile1. You can configure this feature by
using the 46xxsettings.txt file.
Related links
Long-term acoustic exposure protection parameter on page 98
Long-term acoustic exposure protection parameter
Use the 46xxsettings.txt file to set the following parameter.
Parameter name Default value Description
ACOUSTIC_EXPOSURE_PROT
ECT_MODE_DEFAULT
1 Specifies the acoustic exposure
protection mode.
The options are:
• 1: Off
• 2: Dynamic
• 3: 4 hours
• 4: 8 hours
Related links
Long-term acoustic exposure protection on page 97
No Hold Conference
With the No Hold Conference feature, you can add participants to your call while continuing your
active conversation. The No Hold Conference feature lets you create a conference call without
putting any call participant on hold.
For example, if you press the administered No Hold Conf button and then dial an extension the
participant that answers the call joins the no hold conference.
Your administrator can configure your phone to support the no hold conference feature on a button
module. You can use the call appearance for a regular or pre-configured number.
Using the No Hold Conf button you can add more participants to the no hold conference.
The administrator can pre-configure only one number on System Manager. When you press the
No Hold Conf button, the call is placed to the pre-configured number when the participant
answers the call joins the no hold conference.
If the participants do not answer the call within the configured time-out duration 9600 Series IP
Deskphones will display the appropriate message on the phone screen.
Phone administration
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 98
Comments on this document? infodev@avaya.com
To Next Page
Loading...
