Using the headset
• When the deskphone receives a call, the headset produces an audible beep and the user
can answer the call by pressing a button on the headset.
• When a call is established, the user can disconnect the call by pressing a button on the
headset.
• When a user makes or receives a call using the buttons on the deskphone, the headset
automatically connects the speech path without the need for the user to press any buttons on
the headset.
Note:
By default, the deskphone displays the name of the headset profiles that Avaya provides. You
can use the HEADSET_PROFILE_ NAMES parameter to change the name of the headset
profiles.
Calibrating the touch screen
Screen calibration properly aligns the touch screen but should only be used for a significant
problem with the touch screen.
Important:
Use a pencil, a pen, or a stylus rather than your finger to touch the calibration points precisely.
Note:
The CLEAR Craft procedure clears any calibration data set using the CALIBRATE SCREEN
Craft procedure, but does not affect factory-set calibration data. Use the Default softkey to
restore factory-set calibration. Calibration results are not saved as part of a backup. The
feature is not supported on the 9641GS deskphone.
About this task
Use this procedure to calibrate 9621 and 9641 touch screen phones.
Procedure
1. Enter the Administration menu using the password.
2. Select the CALIBRATE SCREEN form the screen.
3. Choose one of the following options:
• Cancel: To returns to the Administration menu screen without calibrating.
• Default: To reset the calibration parameters to the factory default.
• Start: To calibrate the screen.
- Touch the center of the target with the stylus as soon as it appears.
- Touch the next target’s center with the stylus within 10 seconds of its appearance.
Phone administration
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 94
Comments on this document? infodev@avaya.com
To Next Page
Loading...
