Avaya 9600 Series - Installation Checklist; Administration Methods

Installation checklist
Use the following checklist to see the tasks that you must perform to setup and connect the9600
Series IP Deskphones.
No
.
Task Reference
1. Check the prerequisites. See Prerequisites topic for more
information.
2. Collect the configuration data for the
Deskphone, File Server, Network Server/
Switch (LLDP), Avaya Aura
®
System
Manager, and DHCP Server.
See Configuration through DHCP, File
Server configuration, and Configuration
through LLDP topics for more
information.
3. Configure the File Server, DHCP, and
Network Server/Switch (LLDP).
See Configuration through DHCP, File
Server configuration, and Configuration
through LLDP topics for more
information.
4. Create user, session, and
communication profile on Avaya Aura
®
System Manager
SeeAdministering Avaya Aura
®
System
Manager guide for more information.
5. Download and install Avaya Aura
®
System Manager certificates on the
phone.
SeeAdministering Avaya Aura
®
System
Manager guide for more information.
6. Unpack and assemble the deskphone
components.
7. Connect the 9600 Series IP Deskphones
to the power source and network.
See Plugging in the deskphone for more
information.
Administration methods
You can use the following methods to administer the devices. The following table lists the
configuration parameters that you can administer through each of the corresponding methods.
Method
Can administer
IP
addresses
Tagging
and VLAN
Network
Time
Server
Quality of
Service
Application-
specific
parameters
DHCP —
LLDP — — —
Table continues…
Initial setup and connectivity
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 16
Comments on this document? infodev@avaya.com