Enable the Phone Lock feature
To enable the Phone Lock feature, you need to provide SIP login and password information to the
user.
You can configure the Phone Lock feature so that users can manually lock their phones using the
Lock soft key on the Idle phone screen or the Lock feature key. You can also set the idle time
interval after which the phone automatically locks.
To do this, set the following 46xxsettings.txt parameters:
•
SET ENABLE_PHONE_LOCK 1
• SET PHONE_LOCK_IDLETIME: use any value other than 0 for this parameter to set the idle
time interval.
Geographical restrictions on encryption
Starting from R.4.0.4., SRTP is not supported on Avaya J100 Series IP Phones sold in Russia,
Belarus, Kazakhstan, Kyrgyzstan, and Armenia to meet local restrictions on the use of encryption.
On such phones, the settings related to SRTP are excluded both from the phone interface and the
web interface, and the administrator cannot enable SRTP.
Geographical restrictions on encryption
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 141
Comments on this document? infodev@avaya.com
To Next Page
Loading...
