User data (on flash)
• Not applicable
Call Logs (on flash)
• Not applicable
User Passwords (on flash)
• Not applicable
User data in logs (on flash)
• Not applicable
Data privacy and secure data processing
Avaya J100 Series IP Phones provide measures to ensure data privacy and secure processing of
personal data. You can configure the phones in a secure mode to encrypt personal data at rest
and end-to-end encrypt personal data in transit.
Secure mode
In secure mode, phones provide secure processing of personal data. Internal configuration files
are encrypted and any internally generated logs and reports do not persist for longer than 24
hours. You can manually generate a new phone report in secure mode, but the phone deletes it 8
hours after its creation.
Secure mode activation
By default, Secure mode is off on the phones. You can activate secure mode by using one of the
following methods:
• In the 46xxsettings.txt file, set the ENABLE_GDPR_MODE parameter to 1.
• In web interface, navigate to Settings > Privacy > GDPR mode and set it to Enable
Secure mode deactivation
You can deactivate Secure mode by using one of the following methods:
• In the 46xxsettings.txt file, set the ENABLE_GDPR_MODE parameter to 0.
• In web interface, navigate to Settings > Privacy > GDPR mode and set it to Disable
Configuring secure mode parameter
You can configure the following parameter to enable secure mode.
Data privacy and secure data processing
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 139
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
