Avaya 9600 Series - Applications and Features Provisioning

• RESET VALUES - To reset the deskphone to default values including the registration
extension and password, any values administered through local procedures, and values
previously downloaded using DHCP or a settings file.
• RESTART PHONE - To restart the deskphone in response to an error condition, including the
option to reset parameter values.
• SIG - To change the default signaling value from SIP to H.323 or vice versa.
• SIP - To configure SIP call settings.
Warning:
The SIP call settings entered through the Administration menu take precedence over other
sources for this data, for example- 46xxsettings.txt file, or PPM. The only way to
override these settings is to go into the Administration menu and remove the settings or
perform a CLEAR of the phone from the Administration menu.
• SNTP - To configure the time server settings.
• SSON - To set the site-specific option number.
• VIEW - To review the system parameters for the deskphone to verify current values and
file versions.
Applications and features provisioning
You can configure the following parameters to enable or disable certain applications and general
phone features. The following table lists the features and applications and their corresponding
parameters that enable
Application
or feature
Parameter
name
Description
History
application
ENABLE_CA
LL_LOG
If enabled, users can access the list of unanswered and answered calls. If
disabled, the History application is not displayed to the user and calls are
not logged.
Redial ENABLE_RE
DIAL
If enabled, users can redial one to three previously called numbers. If
disabled, redialing is not available to the end user.
Redial list ENABLE_RE
DIAL_LIST
If enabled, users can select a number to redial from a list. If disabled, only
the previously-dialed number can be redialed.
Contacts
application
ENABLE_CO
NTACTS
If enabled, users can access a list of numbers and make calls by
selecting a contact name or number. If disabled, the deskphone does not
display the Contacts application and users cannot set up or maintain the
contact list.
Contacts
modification
ENABLE_MO
DIFY_CONTA
CTS
If enabled, users can change or update the contact list. If disabled, users
cannot change or update the contact list.
Table continues…
Phone administration
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 56
Comments on this document? infodev@avaya.com