Parameter name Default value Description
ENABLE_EXCHANGE_REMIND
ER
0 Specifies whether or not exchange reminders
will be displayed.
Value Operation:
• 0: Not displayed
• 1: Displayed
EXCHANGE_REMINDER_TIME 5 Specifies the number of minutes before an
appointment at which a reminder will be
displayed.
Valid values are 0 through 60.
EXCHANGE_SNOOZE_TIME 5 Specifies the number of minutes in which a
reminder must be displayed again after it is
temporarily dismissed.
Valid values are 0 through 60.
EXCHANGE_NOTIFY_SUBSCRI
PTION_PERIOD
180 Specifies the number of seconds between re-
syncs with the Exchange server.
Valid values are 60 through 3600.
EXCHANGE_EMAIL_DOMAIN Null Specifies the Exchange email domain.
The value can contain 0 to 255 characters.
EXCHANGE_SERVER_SECURE
_MODE
1 Specifies if HTTPS should be used to contact
Exchange servers.
Value Operation
• 0: Use HTTP
• 1: Use HTTPS
EXCHANGE_SERVER_MODE 3 Specifies the protocol to be used to contact
Exchange servers.
Value Operation:
• 1: Use WebDAV
• 2: Use Exchange Web Services (EWS)
• 3: Try EWS first, if that fails, try WebDAV
(default)
Resetting system values
About this task
Use the following procedure to reset all system initialization values to the application software
default values.
Phone administration
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 114
Comments on this document? infodev@avaya.com