Procedure
1. Select CLEAR from the menu.
The phone prompts for confirmation.
2. Press one of the following:
• Clear: To clear all values to use initial default values.
• Cancel: If you do not want to clear all values and to terminate the procedure and retain
the current values.
The phone displays the following text:
Clearing values...
The phone is reset to the default factory settings.
• All system values and system initialization values.
• 802.1X identity and password.
• User options, parameter settings, identifiers, and password.
After clearing the values, the phone resets.
Restarting the phone
About this task
Use the following procedure to restart the phone.
Procedure
1. Use the CRAFT password to gain access to the Administration procedures screen. The
default password is 27238.
2. When you select RESTART PHONE from the Administration procedures screen, the phone
displays a confirmation screen with the following message:
Are you sure you want to restart the phone?
3. Press No to return to the Administration procedures screen without restarting the phone.
Press Yes to proceed with the registration steps
A restart does not affect user-specified data and settings like Contacts data or the phone
login and password.
The remainder of the restart procedure depends on the status of the boot and application
files.
Phone administration
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 116
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
